This grade has a higher molybdenum content, which provides additional corrosion protection in highly corrosive applications and works well in chloride type environments. Once again, slower speed screw-guns are required to minimize thread rollover.Īnother grade of 300 series stainless steel is 316, and was originally developed for sulfurous acid applications. They are available in a wide range of sizes and head styles. These fasteners are widely used in aluminum framing and a variety of panel applications. Self-drilling fasteners are also available in 304 and can have a harden carbon steel drill tip welded to the screw shank in order to drill steel. An installation speed of 1,000 rpm or less is required to preserve thread integrity and holding power. They are typically plated to provide additional lubricity for tapping, and reduce thread failure. As with any self-tapping fastener, using the proper hole size is critical to optimize fastener performance and minimize thread rollover. It offers virtually identical corrosion protection and strength as 302 and 305, and it becomes slightly magnetic during the cold-working process.ģ04 stainless steel fasteners are readily available in self-tapping screws. This special grade of 304 stainless is more durable, and characteristically work-hardens during the fastener’s fabrication, thereby producing tougher threads. To reduce the amount of thread failure, a special modified 304 stainless steel material was developed in the early 1970s primarily for use in the metal building industry. The same problem occurs when using type 305. Although this grade provides exceptional corrosion resistance, it does not work-harden enough to produce the thread hardness required to minimize thread rollover caused by tapping high-tensile or thick steel. One of the more popular grades is type 302, and is typically used in sheet metal and machine screws. These grades cannot be heat treated and rely on cold-working for additional strength. Each grade offers almost identical corrosion protection, but varies in performance with reference to installation and resistance to chemical attack. This stainless family consisting of type 302, 304, 305 and 316, is one of the most misunderstood. Of these two, the 18-8 series provides the best corrosion resistance and ductility. The two most popular types of stainless steel fasteners are 18-8 (300 series) and 400 series. Generally, stainless grades that have higher chromium content will be more resistant to red rust (iron oxide). Other elements are added in various amounts that will enhance corrosion resistance, workability and increase strength. The chromium reacts with oxygen and forms chromium oxide, which is very thin passive film that is invisible, self-forming and self-healing. It’s primarily this chromium that gives steel its corrosion resistance properties when exposed to weather, much like pure chromium plate used on automobile trim. Typically, stainless steel is defined as a family of iron-based alloys that contain a minimum of approximately 12% chromium. Many people may recognize a fastener made from stainless steel, but find it difficult to determine what grade is needed and how it may perform in the application.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |